HOME

â 2006

HOME

SteamShop a div. of
J.W. Allen & Associates, Inc.
2403 Market Street
Jacksonville
, Fl 32206

Visit Our Other Site:
JC Procurements.com
Over 42,000 HVAC parts

E- Mail SteamShop

Call Us
877-690-4996

   Warrick Controls

 Fax Us
904-353-5608

 


Click for Spec Sheet
OBSOLETED


1C1D0

OBSOLETED


1D1D0

OBSOLETED


1E1D0

OBSOLETED


1F1D0

OBSOLETED


1G1D0

OBSOLETED


1H1D0

OBSOLETED


1J1D0

OBSOLETED

1C1D0A

OBSOLETED

1D1D0A

OBSOLETED

1E1D0A

OBSOLETED

1F1D0A

OBSOLETED

1G1D0A

OBSOLETED

1H1D0A

OBSOLETED

1J1D0A

OBSOLETED

The 1 series have been replaced by
16, 16M, 26 Series and the 26M Series General Purpose

Series 16

Engineered for general purpose single-level or differential applications, these controls have spade terminals for easy wiring and provide sensitivities up to 1 million Ohms/cm. Series 16D controls are similar to Series 16, but include DPDT load contacts to eliminate the need for slave relays.

series16.bmp

Series 16M

Engineered for general purpose single-level or differential service, Series 16M controls combine the reliability of solid state electronics and the convenience of a plug-in design.

series16m.bmp

Series 26

Designed for boiler low-water cutoff protection. A snap-through standoff mounting device is available for the Series 26. Optional Power Outage feature resets after nuisance outages. Optional reset button is used when device has been deactivated because of low water condition. Reset is functional only if water has returned to normal

series26.bmp

Series 26M

Series 26M is designed for low-water cutoff protection and meets CSD1 requirements for boiler low water cutoff. If non-powered contacts are required, please contact factory and request information on Series 26NM.

series26m.bmp

Call 877-690-4996 For Current Price and Availability

E-Mail

 


Click for Spec Sheet

Warrick

3E1A

3E1B

3E2B

3E2C

3E3B

3E4B

3E5B

Warrick Series 3E - Probe Fitting, NPT Mounting

Series 3E fittings are cast metal, pressure-tight assemblies capable of holding 1-7 probes. Fittings are attached to vessels via male NPT mounting. Series 3E Fittings require the use of 3R rigid or 3W wire suspended electrodes.

 


Click for Spec Sheet

3B1B

3B2B

3B3B

Warrick Series 3B - Two-Piece Threaded Coupling

Series 3B fittings are compact pressure tight assemblies that hold a single electrode probe for use in water and chemicals. These fittings incorporate a 1/4-20 female thread that must be combined with a Series 3R rigid electrode or Series 3W wire suspended electrode to make a complete assembly. Series 3B fittings are available with three different mounting threads, and are capable of withstanding up to 400 psig at 406°F

 

img3C

Click for Spec Sheet

 

img3K

 

Warrick Series 3C - Short Probes External Mount Side Chamber

Series 3C side chamber fittings are cast iron or brass, pressure-tight chambers containing up to 4 probes from 1-1/2in. to 6in. in length. Pipe tappings provide connection to the side of boilers and pressure vessels to equalize the level in the chamber with the level in the vessel.

 

 

 

 

 

 

 

Warrick  Series 3K Long External Mount Side Chamber
Fittings contain up to 4 probes and accommodate probes from 1-3/4˝ to 13˝ in length. Additional tappings are available for tricocks and gauges.

 

 

Call 877-690-4996 For Current Price and Availability

E-Mail

 

Warrick

3Z1B

3W1

3W2


Click for Spec Sheet

Warrick Series 3W – Wire Suspended Probes

  •  Metallic Bars
  •  Plastic Shield Protected
  •  Adaptable to Many Fittings
  •  Field Assembled

Series 3W probes, consisting of metallic bars within a protective

plastic shield, are designed to be suspended above liquid with

PVC-insulated wires. They are ideal for applications where rigid

electrode rods are impractical or cumbersome, such as:

 

 

img3Y

Click for Spec Sheet

Warrick Series 3Y – Corrosion Resistant Probes

  • Metallic Bars
  •  Corrosion Resistant
  •  Available in Many Materials for Various Requirements
  •  Adaptable for Various Fittings

Series 3Y wire suspended probes consist of metallic bars within a

protective plastic shield, designed to be suspended in liquid. Series

3Y suspension wires are PVC or Tefl on® insulated for use in corrosive

liquid applications. 7/8˝ (2.22 cm) diameter x 3-1/2˝ (8.90 cm) length.

 

 

img3L

Click for Spec Sheet

img3J

Warrick Series 3J – Miniature Fitting

Warrick Series 3L – Miniature Fitting

  •  Small Size
  •  Pressure Rated (3L)
  •  U.L. Recognized (3L)

The Series 3J Miniature Fitting has a 1˝ NPT body and housing. It

is designed for applications where multiple probes are required in a

small, non-pressured location. (For single probe applications, Gems

recommends using a 3E1 fitting.)

Series 3L Miniature Fittings have an 1/8˝ NPT bushing and are rated

for up to 150 psi.

 

 

img3F

Click for Spec Sheet

img3G

Warrick Series 3F – General Purpose Flanged Fittings

Warrick Series 3G – Corrosion Resistant PVC Fittings

·         Flange Connections

·          Pressure Tight Assembly

·         Polycarbonate Housing (3G)

·          Epoxy-Coated Aluminum Housing (3F)

·         NPT Fitting (3G)

·         Accepts Various Probes

·         CSA Approved

Designed for general purpose service, Series 3F flanged, pressure tight

fittings can handle up to 7 probes. They mate with standard

pipe flanges coupled to the top of the vessel. Available in a variety of

materials.

Series 3G fittings are designed for general purpose use, and are made

of PVC to withstand corrosive conditions. The flanged assemblies

are sized to accommodate up to 7 probes and to mate with standard

flanges on the tops of vessels.

 

 

Call 877-690-4996 For Current Price and Availability

E-Mail

 

img3M

Click for Spec Sheet

Warrick Series 3M – Food Grade Fitting

Warrick Series 3MT – Food Grade Fitting

  •  Easy Removal for Cleaning
  •  CSA Approved
  •  FDA Approved Materials

Designed for use in food, beverage and pharmaceutical applications

where cleanliness is vital. Two-piece Series 3M assemblies can handle

up to 4 probes. FDA-approved materials. Engineered for fast removal

of fitting to facilitate cleaning and sterilization.

Series 3MT fittings are similar to 3M fittings, except they also

feature Teflon®-covered probes with polished tips to meet the most

demanding application requirements.

 

 

imgM

Click for Spec Sheet

Series M

Warrick Mechanical Tilt Float Level Switch

  • Non-Mercury Switch
  • Sealed Cable
  • Impact & Corrosion Resistant ABS Shell
  • N.O., N.C., SPDT Contacts
  • Various Cable Lengths
  • Color Coded Body

Designed for level control and alarm applications in difficult liquids such

as sewage and waste water. Series M mechanical tilt fl oats are ideal

for applications where the presence of mercury is a concern. Series M

Switches have impact resistant ABS shell and neoprene jacketed cable.

 

 

img3S

Click for Spec Sheet

Warrick Series 3S – Multi-Wire Suspended Fittings

 

  • Probe Isolation
  • Long Length

 

The 3S series electrode fitting is designed to provide isolation of

electrodes from liquids containing solids, grease, soaps, sludge, rags,

paper and other debris commonly found in wastewater and sewage

pumping applications.

Isolation is accomplished by enclosing wire suspended electrodes

within a 1-1/2˝ galvanized pipe assembly with a neoprene flexible

bulb installed on the lower end of the pipe. The bulb and pipe

assemblies contain 3-1/2 quarts clean water with one ounce of sodium

bicarbonate (baking soda).

When mounted in a sump, the pipe and bulb assembly is acted on

by the hydrostatic pressure exerted by the liquid outside the bulb.

Assuming the density of the liquid outside is equal to water, the height

of the water inside the bulb will equal the height outside.

 

 

Call 877-690-4996 For Current Price and Availability

E-Mail

 

WControla

Click for Spec Sheet

Warrick

CP Series Control Panels

Standard Level Control

System Electrical Panels

  •  NEMA-1 Enclosure – General Purpose
  •  NEMA-4 Enclosure – Water Resistant
  •  NEMA-4X Enclosure – Corrosion and Water Resistant
  •  Optional Equipment – Visual Alarms, High & Low Audible/Silent

Alarms, Hand-off Auto Switches

When it comes to control panels, Gems Sensors can satisfy most

requirements with our new family of CP Series Panels. These standard

models were specifically designed around our most popular panel

types. These industrial control panels interface with level and flow

switches, Warrick conductance probes and a variety of sensors and

are factory set for pump up/pump down. Gems can provide the panel

and sensors you need for intrinsically safe and non-intrinsically safe

environments. With each control panel, Gems provides electrical and

mechanical drawings along with installation and operations manuals.

 

 

img16M

Click for Spec Sheet

Warrick Series 16 Modules

Controls – Solid State Plug-In Modules

  •  Compact Size
  •  Solid State Reliability
  •  Modular Plug-in Design
  •  LED Monitoring
  •  CSA Approved
  •  Various Time Delays
  •  U.L. “Motor Control”
  •  Low Voltage Sensor

 

 

img26M

Click for Spec Sheet

Warrick Series 26 Modules

Low-Water Cutoff – Plug-In Modules

  • Powered Contacts
  • Solid State Reliability
  • Modular Plug-In Design
  • LED Monitoring
  • Low Voltage Sensor
  • Time Delays Available
  • 11-Pin Socket
  • Meets CSD1 Requirements
  • CSA Approved
  • U.L. “Limit Control”
  • Optional Test Feature
  • Optional Dirty Electrode Detection
  • Optional Manual Reset Button Feature.

If Level Drops, Control is Deactivated Until Liquid Level

Returns to Normal and Pushbutton is Depressed

·        Optional Power Outage Feature Ignores Nuisance Outages

and Resets When Power is Restored

Series 26M – General Purpose Control

Series 26M is designed for low-water cutoff protection. This control meets CSD1

requirements for boiler low water cutoff. Series 26M features powered contacts.

If non-powered contacts are required, request information on Series 26NM.

 

 

img26

Click for Spec Sheet

Warrick Series 26

Low Water Cutoff – Standoff Mount

·       Meets CSD1 Requirements

·       Snap-Thru Standoff Mounting

·       Non Powered Contacts

·       Compact Size

·       Time Delays Available

·       Power Outage Feature

·       LED Monitoring

·       CSA Approved

·       U.L. “Limit Control”

·       Test Feature

·       AC Current Minimizes Electrolysis

·        Optional Dirty Electrode Detection

Series 26 – General Purpose Control

Designed for boiler low-water cutoff protection. A snap-through standoff mounting

device is available for Series 26 units. Optional Power Outage feature resets after

nuisance outages. Optional reset button is used when device has been deactivated

because of low water condition. Reset is functional only if water has returned to

normal level. Built-in 3 second time delay is standard. Up to 90 seconds available for

increasing and decreasing levels.

 

 

 

 Call 877-690-4996 For Current Price and Availability

E-Mail