|
Hago
Oil Nozzles
|
Your
Price
|
|
|
"H" - Hollow Cone -
Red Caps
This series distributes the atomized oil particles evenly toward the outside
of the the spray cone. These nozzles are particularly well suited for low
firing rates and burners with hollow air pattern. Normally used in wider
spray angles.
|
30°
45°
60°
70°
80°
90°
|
.65 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.40 - 9.00 GPH
.50 - 9.00 GPH
Call for Pricing
|
.40 - .45 gph
.50 - 5.50 gph
6.0 - 15 gph
16 - 35 gph
36-100 gph
|
$8.25 each
$8.25 each
$9.36 each
$9.76 each
|
|
|
"EH" - Extra Hollow
Cone - Red Caps This type
"EH" is an extension of our hollow cone series. Available from 4.00
GPH through 30.00 GPH. It is specified in many commercial applications.
|
45°
70°
|
4.00 - 30.00 GPH
4.00 - 30.00 GPH
|
|
|
|
|
"S-S" - Semi Solid
Cone - Blue Caps
Most suitable for general applications where exact air pattern or spray
pattern requirements can't be established. Droplet distribution is relatively
even across spray cone in smaller flow rates, but becomes more hollow as flow
rates increase.
|
30°
45°
60°
70°
80°
90°
|
.65 - 20.00 GPH
.40 - 35.00 GPH
.40 - 35.00 GPH
.40 - 35.00 GPH
.40 - 35.00 GPH
.50 - 20.00 GPH
|
|
|
|
|
"B" - Solid Cone - Black Caps
Designed to give optimum combustion efficiency on high static pressure flame
retention burners which specifically a "B" pattern. As compared to
our "ES" pattern, somewhat more fuel is concentrated towards the
center of the spray.
|
30°
45°
60°
70°
80°
90°
|
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
.40 - 2.00 GPH
|
|
|
|
|
"ES" - Solid Cone
- Green Caps
Our original solid cone series for low flow rates. Available for applications
specifying a solid "ES" pattern.
|
30°
45°
60°
70°
80°
|
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
.40 - 1.75 GPH
|
|
|
|
|
"P" - Solid Cone -
Green Caps
The "P" type is an extension of our "B" and
"ES" series for firing rates of 2.00 GPH and above. It produces a
solid cone pattern in the low rates and becomes more hollow as the flow rate
increases. Specially designed with a pocketed disc to reduce combustion
noises and pulsation.
|
30°
45°
60°
70°
80°
|
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
2 - 15.00 GPH
|
|
|
|
|
"LC" - Large
Capacity - Blue Caps
These nozzles are uniquely designed for outstanding combustion in large
commercial burners. They have large internal passageways to accommodate high
flow rates. They produce a semi-solid "universal" pattern.
|
45°
60°
80°
|
35 - 120.00 GPH
35 - 120.00 GPH
35 - 120.00 GPH
|
|
|
|
|
"W" - Universal
Nozzle - Orange Caps
For installations where the use of a defined hollow or solid nozzle does not
provide the combustion result desired.
|
30°
45°
60°
70°
80°
90°
|
.65 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.40 - 8.00 GPH
.50 - 8.00 GPH
|
|
|
|
|
"DFN"
- Dual Filtration - White Caps
Available in hollow (DFN-H) and solid cone (DFN-B) patterns, the DFN nozzles
give enhanced protection against clogging in the very low rates.
|
45°
60°
70°
80°
|
.30 - 1.00 GPH
.30 - 1.00 GPH
.30 - 1.00 GPH
.30 - 1.00 GPH
|
|
|
|
|
"Siphon" Nozzle -
Gray Caps
Air atomizing nozzle for the combustion of waste oil and other variable waste
oil products.
|
3PSIG-Air
4PSIG-Air
5PSIG-Air
|
.20 - 1.00 GPH
.20 - 1.00 GPH
.30 - 1.00 GPH
|
|
|
