|
Series: 110-10,
1110-10
Description: Automatic, Modulating Float Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 110-10, 1110-10 Automatic, Modulating Float Control Valves are used in
commercial and municipal applications to maintain a constant level of water
in storage tanks and reservoirs. It keeps flow control into the tank
proportional to discharge flow, allowing the tank to remain full. It consists
of a ductile iron main valve, modulating float control, and has adjustable
closing speed. Series 110-10, 1110-10 provides drip-tight, positive closure
and stable throttling characteristics at low, intermediate, and peak flow
rates. It is ideal for use in drinking water systems. Available in globe
(110-10) or angle (1110-10) patterns with threaded or flanged end connections.
Valve size same as fill line or one size smaller; match size/capacity to
discharge requirements. Maximum Working Pressure: threaded: 400psi (27.5 bar)
MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 110-14,
1110-10
Description: Automatic, On/Off Float Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 110-14, 1110-14 Automatic, On/Off Float Control Valves are used in
commercial and municipal applications to maintain water levels in storage
tanks and reservoirs. It opens fully when the level reaches the preset low
point and shuts off when the high level is reached. Sizes 4 in. and smaller
consists of a ductile iron main valve, float pilot, and upper and lower level
adjustment stops. Sizes 6 in. and larger consists of a ductile iron main
valve, float pilot, upper and lower level adjustment stops, accelerator, and
adjustable opening and closing speeds. It is ideal for use in drinking water
systems. Available in globe (110-14) or angle (1110-14) patterns with
threaded or flanged end connections. Valve size same as fill line or one size
smaller. Maximum Working Pressure: threaded: 400psi (27.5 bar) MWP, 150
flanged: 250psi(17 bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 113-12, 1113-12
Description: Automatic Solenoid Control Valves
Size Range: 1 1/4 to 4 in. (32 to 102mm) (Globe and Angle)
Series 113-12, 1113-12
Automatic, Solenoid Control Valves are used in commercial and municipal
applications to maintain water levels in storage tanks and reservoirs. It is
electrically operated to open fully or close tight, depending on the
actuation position of the solenoid. It can be remotely operated by timers,
relays, probes, or any triggered device to the solenoid. It consists a
ductile iron main valve, a 3-way solenoid, and a flo-clean strainer. It is
ideal for use in drinking water systems. Available in globe (113-12) or angle
(1113-12) patterns with threaded or flanged end connections. Valve size same
as fill line or one size smaller. Maximum Working Pressure: threaded: 400psi
(27.5 bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi (27.5
bar) MWP.
|
|
Series: 113-6,
1113-6
Description: Automatic Solenoid Control Valves with High Capacity Controls
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 113-6, 1113-6 Automatic, Solenoid Control Valves with High Capacity
Controls are used in commercial and municipal applications to maintain water
levels in storage tanks and reservoirs. It is electrically operated to open
fully or close tight, depending on the actuation position of the solenoid. A
high-capacity accelerator assures quick valve response to the solenoid
signal. It can be remotely operated by timers, relays, probes, or any
triggered device to the solenoid. It consists a ductile iron main valve, a
3-way solenoid, a flo-clean strainer, adjustable open and close speeds, and
an accelerator control. It is ideal for use in drinking water systems.
Available in globe (113-6) or angle (1113-6) patterns with threaded or
flanged end connections. Valve size same as fill line or one size smaller. Maximum
Working Pressure: threaded: 400psi (27.5 bar) MWP, 150 flanged: 250psi (17
bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 115,
1115
Description: Automatic, Pressure-Reducing Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 115, 1115 Automatic, Pressure-Reducing Control Valves are used in
commercial and industrial applications to maintain rate-of-flow water
pressure to storage tanks and reservoirs. It automatically reduces a higher
inlet pressure to a constant lower outlet pressure regardless of changing
flow rate and/or varying inlet pressure. It consists of a ductile iron main
valve, a pressure reducing control, fixed orifice, and adjustable opening
speed (3 in. and smaller). Series 115, 1115 is ideal for dead-end systems
and/or systems using high-demand, on/off equipment. Available in globe (115)
or angle (1115) patterns with threaded or flanged end connections. Valve size
one size smaller then line. Maximum Working Pressure: threaded: 400psi (27.5
bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar)
MWP.
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 115-2,
1115-2
Description: Automatic, Pressure-Reducing and Sustaining Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 115-2, 1115-2 Automatic, Pressure-Reducing and Sustaining Control
Valves are used in commercial and industrial applications to sustain
rate-of-flow water pressure to storage tanks and reservoirs. It automatically
reduces a higher inlet pressure to a constant lower outlet pressure
regardless of changing flow rate and/or varying inlet pressure. The pressure
sustaining control prevents the upstream pressure from dropping below a
preset minimum. It consists of a ductile iron main valve, a pressure reducing
control, sustaining control, fixed orifice, and adjustable opening speed (3
in. and smaller). Available in globe (115-2) or angle (1115-2) patterns with
threaded or flanged end connections. Valve size one size smaller then line.
Maximum Working Pressure: threaded: 400psi (27.5 bar) MWP, 150 flanged:
250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 115-3,
1115-3
Description: Automatic, Pressure-Reducing Control Valves with Check
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 115-3, 1115-3 Automatic, Pressure-Reducing Control Valves with Check
are used in commercial and industrial applications to maintain rate-of-flow
water pressure and prevent backflow of contaminated water to storage tanks
and reservoirs. It automatically reduces a higher inlet pressure to a
constant lower outlet pressure regardless of changing flow rate and/or
varying inlet pressure. The hydraulic check prevents reverse flow of
contaminated water when backpressure exists in the line. It consists of a
ductile iron main valve, a pressure reducing control, check valve, fixed
orifice, and adjustable opening speed (3 in. and smaller). Available in globe
or angle patterns with threaded or flanged end connections. Valve size one
size smaller then line. Maximum Working Pressure: threaded: 400psi (27.5 bar)
MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 115-4,
1115-4
Description: Automatic, Pressure-Reducing Solenoid Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 115-4, 1115-4 Automatic, Pressure-Reducing Solenoid Control Valves are
used in commercial and industrial applications to maintain rate-of-flow water
pressure to storage tanks and reservoirs. It automatically reduces a higher
inlet pressure to a constant lower outlet pressure regardless of changing
flow rate and/or varying inlet pressure. The solenoid override feature allows
electrical on/off operation of the valve. It consists of a ductile iron main
valve, a pressure reducing control, 2-way solenoid, fixed orifice, and
adjustable opening speed (3 in. and smaller). Available in globe (115-4) or
angle (1115-4) patterns with threaded or flanged end connections. Valve size
one size smaller then line. Maximum Working Pressure: threaded: 400psi (27.5
bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar)
MWP.
|
|
Series: 115-7,
1115-7
Description: Automatic, Pressure-Reducing Surge Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 115-7, 1115-7 Automatic, Pressure-Reducing Surge Control Valves are
used in commercial and industrial applications to maintain rate-of-flow water
pressure to storage tanks and reservoirs and prevent downstream pressure
buildup. It automatically reduces a higher inlet pressure to a constant lower
outlet pressure. If the flow rate decreases rapidly, a pressure controlled
surge pilot closes the valve to prevent downstream pressure buildup. It
consists of a ductile iron main valve, a pressure reducing control, surge
control, fixed orifice, and adjustable opening speed (3 in. and smaller).
Series 115-7, 1115-7 is ideal for dead-end systems and/or systems using
high-demand, on/off equipment. Available in globe (115-7) or angle (1115-7)
patterns with threaded or flanged end connections. Valve size one size
smaller then line. Maximum Working Pressure: threaded: 400psi (27.5 bar) MWP,
150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 115-74,
1115-74
Description: Automatic, Pressure-Reducing Control Valves with Low Flow,
By-Pass
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 115-74, 1115-74 Automatic, Pressure-Reducing Control Valves with Low
Flow By-Pass are used in commercial and industrial applications to maintain
rate-of-flow water pressure to storage tanks and reservoirs. It automatically
reduces a higher inlet pressure to a constant lower outlet pressure
regardless of changing flow rate and/or varying inlet pressure. The low flow
by-pass feature bypasses the main valve pressure function for low flow
conditions. It consists of a ductile iron main valve, a pressure reducing
control, low flow by-pass control, fixed orifice, and adjustable opening
speed (3 in. and smaller). Available in globe (115-74) or angle (1115-74)
patterns with threaded or flanged end connections. Maximum Working Pressure:
threaded: 400psi (27.5 bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400
flanged: 400psi (27.5 bar) MWP.
|
|
Series: 6115-JM
Description: Automatic, Pressure-Reducing Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 6115-JM Automatic, Pressure-Reducing Control Valves are used in
commercial and industrial applications to maintain rate-of-flow water
pressure to storage tanks and reservoirs by automatically reducing a
fluctuating higher upstream (inlet) pressure to a constant lower downstream
(outlet) pressure. It uses a pilot regulator to control the open and close positions
when downstream pressure fluctuates. It consists of a ductile iron main
valve, a pressure reducing pilot control, supply orifice, position indicator,
flow clean strainer, ball valve, and adjustable opening speed. Available in
globe or angle patterns with threaded or flanged end connections. Maximum
Working Pressure: threaded: 400psi (27.5 bar) MWP, 150 flanged: 250psi (17
bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 6115-7JM
Description: Automatic, Pressure-Reducing & Downstream Surge Control
Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 6115-7JM Automatic,
Pressure-Reducing & Downstream Surge Control Valves are used in
commercial and industrial applications to maintain rate-of-flow water
pressure to storage tanks and reservoirs by automatically reducing a
fluctuating higher upstream (inlet) pressure to a constant lower downstream
(outlet) pressure. It uses a pressure-reducing pilot regulator to control the
open and close positions when downstream pressure fluctuates. If downstream
pressure becomes greater than the desired setpoint, the closed surge pilot
opens and admits higher inlet pressure into the valve cover, increasing rate
of valve closure. It consists of a main valve, a pressure-reducing pilot,
surge pilot, supply orifice, position indicator, flow clean strainer, ball
valve, and adjustable opening speed. Available in globe or angle patterns
with threaded or flanged end connections. Maximum Working Pressure: threaded:
400psi (27.5 bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi
(27.5 bar) MWP.
|
|
Series: 6115-74JM
Description: Automatic, Pressure-Reducing Control Valves with Low-Flow
By-Pass
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 6115-74JM Automatic, Pressure-Reducing Control Valves with Low-Flow
By-Pass are used in commercial and industrial applications to maintain
rate-of-flow water pressure to storage tanks and reservoirs by automatically
reducing a fluctuating higher upstream (inlet) pressure to a constant lower
downstream (outlet) pressure across a broad range of flow requirements. It
uses a pressure-reducing pilot regulator to control the open and close
positions when downstream pressure fluctuates. The low-flow by-pass pilot is
piped "around" the main valve, and is set approximately 10psi
higher. Flow requirements below the range of the main valve are handled by
the this by-pass pilot. It consists of a main valve, a pressure-reducing
pilot, low-flow by-pass pilot, supply orifice, position indicator, flow clean
strainer, ball valve, and adjustable opening speed. Available in globe or
angle patterns with threaded or flanged end connections. Maximum Working
Pressure: threaded: 400psi (27.5 bar) MWP, 150 flanged: 250psi (17 bar) MWP,
400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 116, 1116
Description: Automatic, Pressure-Relief Sustaining Control Valves
Size Range: 1 1/4 to 24 in. (32 to 610mm) (Globe) 1 1/4 to 12 in. (32 to
305mm) (Angle)
Series 116, 1116 Automatic, Pressure-Relief Sustaining Control Valves are
used in commercial and industrial applications to maintain rate-of-flow water
pressure to storage tanks and reservoirs. It is installed on a by-pass line
and is accurately controlled by relief of excess pressure. When installed in
a mainline, it prevents upstream pressure from dropping below a preset
minimum. It consists of a main valve, a sustaining control, and adjustable closing
speed. Valve size one or two sizes smaller than main line. Available in globe
(116) or angle (1116) patterns with threaded or flanged end connections.
Maximum Working Pressure: threaded: 400psi (27.5 bar) MWP, 150 flanged:
250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 1116FH
Description: Automatic, Fire Hydrant, Relief Control Valves
Series 1116FH Automatic, Fire Hydrant, Relief Control Valves are used in fire
protection applications to provide temporary relief and surge protection to
municipal and rural water systems by attaching directly to a fire hydrant
with a swivel on the inlet of the valve. The swivel can be rotated 360° and
locked in any position allowing surges to discharge safely to an area for
watering or storm drain runoff. It consists of a main valve with an angle
pattern and 2 in. threaded ends, a BP30 relief control, fixed orifice,
pressure gauge, 2 1/2 in. FNST swivel, and a flow clean strainer. It is
lightweight and compact with high capacity. Maximum Working Pressure:
threaded: 400psi (27.5 bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400
flanged: 400psi (27.5 bar) MWP.
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 115F,
1115F
Description: Automatic, Pressure-Reducing, Fire Protection Control Valves
(UL Listed)
Size Range: 3, 4, 6, and 8 in. (76, 102, 152, 203mm) (Globe or Angle)
Series 115F, 1115F Automatic, Pressure-Reducing, Fire Protection Control
Valves (UL Listed) are used in fire protection applications to provide
temporary relief and surge protection to municipal and rural water systems.
It automatically reduces a higher inlet pressure to a constant lower outlet
pressure regardless of changing flow rate and/or varying inlet pressure
(adjustable). It consists of a main valve, 263 pressure reducing control,
fixed orifice, and flow-clean strainer. They are UL listed and provide
dependable accurate control and long life. UL listed sizes 3, 4, 6, and 8 in.
in cast iron 125#. UL listed sizes 3, 4, and 6 in cast steel 300#. Maximum
Working Pressure: threaded: 400psi (27.5 bar) MWP, 150 flanged: 250psi (17
bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Series: 116FM,
1116FM
Description: Automatic Fire Pump Relief Valves
Size Range: 3, 4, 6, and 8 in. (76, 102, 152, 203mm) (Globe or Angle)
Series 116FM, 1116FM Automatic Fire Pump Relief Valves are used in fire
protection applications to provide temporary relief and surge protection to
municipal and rural water systems. It automatically maintains constant
inlet/upstream pressure by relieving excess pressure (adjustable). It
consists of a main valve, PV20C relief control, fixed orifice, pressure gauge,
check valve, and flow-clean strainer. They are UL listed, FM approved and
provide dependable accurate control and long life. FM approved sizes 4, 6,
and 8 in. UL listed sizes 3, 4, 6, and 8 in. in cast iron 125#. UL listed
sizes 3, 4, and 6 in cast steel 300#. Maximum Working Pressure: threaded:
400psi (27.5 bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi
(27.5 bar) MWP.
|
|
Series: 100D-A
Description: Pneumatic and Hydraulic Deluge Valves (UL Listed)
Size Range: 4, 6, 8, and 10 in. (102, 152, 203, and 254mm) (Globe)
Series 100D-A Pneumatic and Hydraulic Deluge Valves (UL Listed) are used in
fire protection applications to provide water flow to fire sprinkler systems.
It opens on demand at the loss of control pressure or by manual opening. The
pilot system can be hydraulically, pneumatically, or manually operated. It
consists of a deluge main valve, 100M pneumatic/hydraulic control, fixed
orifice restriction, ball valve, and flow-clean strainer. Available in cast
iron 125# or cast steel 150#, with copper tubing and brass fittings or
stainless steel tubing and fittings. Maximum Working Pressure: threaded:
400psi (27.5 bar) MWP, 150 flanged: 250psi (17 bar) MWP, 400 flanged: 400psi
(27.5 bar) MWP.
|
|
Series: 100D-B
Description: Electronically Actuated (Solenoid) Deluge Valves (UL Listed)
Size Range: 4, 6, 8, and 10 in. (102, 152, 203, and 254mm) (Globe)
Series 100D-B Electronically Actuated (Solenoid) Deluge Valves (UL Listed)
are used in fire protection applications to provide water flow to fire
sprinkler systems. It opens on demand by electrical signal or by manual
opening. The pilot system can be hydraulically, pneumatically, or manually
operated. It consists of a deluge main valve, 100M pneumatic/hydraulic
control, fixed orifice restriction, ball valve, 3-way solenoid, and
flow-clean strainer. Available in cast iron 125# or cast steel 150#, with
copper tubing and brass fittings or stainless steel tubing and fittings.
Maximum Working Pressure: threaded: 400psi (27.5 bar) MWP, 150 flanged:
250psi (17 bar) MWP, 400 flanged: 400psi (27.5 bar) MWP.
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 127SS
Description: Process Steam Pressure Regulators
Size Range: 1/2 to 3 in. (15 to 80mm)
Series 127SS Process Steam Pressure Regulators are used in commercial,
industrial, and institutional applications to regulate steam pressure in the
main line and large capacity process services. They feature a bronze body
with NPT threaded inlet and outlet connections, single seat, and diaphragm.
Sizes 1/2 to 1 1/4 in. have composition disc. Sizes 1 1/2 to 3 in. have
stainless steel disc. Series 127SS is designed for initial pressures up to
250psi (17.5 bar).
|
|
|
Series: F127SS
Description: Process Steam Pressure Regulators
Size Range: 3, 4 in. (80, 100mm)
Series F127SS Process Steam Pressure Regulators are used in commercial,
industrial, and institutional applications to regulate steam pressure in main
line and large capacity process services. They feature a cast iron body with
flanged inlet and outlet connections, single seat, and diaphragm. Series
F127SS has a stainless steel disc and is designed for initial pressures up to
125psi (8.6 bar).
|
|
|
Series: 152A
Description: Process Steam Pressure Regulators
Size Range: 1/2 to 2 in. (15 to 50mm)
Series 152A Process Steam Pressure Regulators are used in commercial,
industrial, and institutional applications to regulate steam pressure in
autoclaves, steam tables/irons, vulcanizers and large capacity process
services. It is highly sensitive to reduced pressure changes. It consists of
an iron body construction with NPT threaded female inlet and outlet
connections, stainless steel strainer, laminated metal diaphragm, and
sensitivity adjustment feature for critical flow. Series 152A offers full
volume with minimum pressure drop and in-line serviceability. It is ideal for
use on sterilizers, process lines, testing fixtures, and oil lines. Tight
seating Model 152A-T available for dead end and liquid services. Maximum
Supply Pressure: Up to 200psi (13.8 bar).
|
|
|
Series: 152SS
Description: Stainless Steel Process Steam Pressure Regulators
Size Range: 1/2, 3/4, and 1 in. (15, 20, and 25mm)
Series 152SS Stainless Steel Process Steam Pressure Regulators are used in
commercial, industrial, and institutional applications to regulate steam
pressure in autoclaves, steam tables/irons, vulcanizers and large capacity
process services. It is highly sensitive to reduced pressure changes. It consists
of a stainless steel body construction with NPT threaded female inlet and
outlet connections, stainless steel strainer, stainless steel seat, stainless
steel diaphragm, Teflon disc, and sensitivity adjustment feature for critical
flow. Series 152SS offers full volume with minimum pressure drop and in-line
serviceability. It is ideal for use on sterilizers, process lines, testing
fixtures, and oil lines. Tight seating Model 152SS-T available for dead end
and liquid services. Maximum Supply Pressure: Up to 300psi (21 bar) at 420°F
(216°C).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 252A
Description: Process Steam Pressure Regulators
Size Range: 1/2, 3/4 in. (15, 20mm)
Series 252A Process Steam Pressure Regulators are used in commercial,
industrial, and institutional applications to regulate steam pressure in
autoclaves, steam tables/irons, vulcanizers and large capacity process
services. It is highly sensitive to reduced pressure changes. It consists of
a bronze body construction with NPT threaded female inlet and outlet
connections, stainless steel strainer, laminated metal diaphragm, and
sensitivity adjustment feature for critical flow. Series 252A offers full
volume with minimum pressure drop and in-line serviceability. It is ideal for
use on sterilizers, process lines, testing fixtures, and oil lines. Tight
seating Model 252A-T available for dead end and liquid services. Maximum
Supply Pressure: Up to 300psi (21 bar).
|
|
|
Series: 26A
Description: Small Pressure Regulators
Size Range: 1/8 to 1/2 in. (3 to 15mm)
Series 26A Small Pressure Regulators are used in small general purpose
applications to regulate pressure in piping systems using water and No. 2
fuel oil. It consists of a brass body construction with NPT threaded female
inlet and outlet connections, 1/4 in. 2-way low-pressure gauge port, aluminum
spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and
tee handle adjustment. Options include Viton trim and slotted adjusting
screw. Strainers are recommended. Series 26A has an oversized orifice and is
ideal for use on beverage dispensing and paint spraying equipment, ice cube
machines, humidifiers, drinking fountains, and other small process
applications. Maximum Working Pressure: 300psi (21 bar).
|
|
|
Series: P50, P60
Description: Mini Plastic Water Pressure Regulators
Size Range: 1/4 in. (8mm)
Series P50, P60 Mini Plastic Water Pressure Regulators are used in OEM and
irrigation applications to regulate pressure in systems that require a
constant downstream and accurate flow performance. It consists of a
thermoplastic body construction with 1/4 in. NPT female connections in a
straight through or 90° inlet to outlet design, all external components of
NSF approved thermoplastics, all internal rubber components (disc, diaphragm,
and seals) of FDA grade elastomers, all internal metal components of 300
Series stainless steel, and a bottom clean-out plug for service. Options
include 3/4 in. hose connection, 1/4 in. gauge, strainer, double gauge port,
quick disconnect for plastic tubing, and mounting kit. Series P50, P60 is
compact and lightweight with a high flow capacity. It is ideal for deionized
water applications. Maximum Working Pressure: 300psi (21 bar).
|
|
|
Series: IR-56
Description: Bronze Water Pressure Regulators
Size Range: 3/4 in. (20mm)
Series IR-56 Bronze Water Pressure Regulators are used in OEM applications to
regulate water pressure in grid systems and recreational vehicles. It
consists of a bronze body construction with a male inlet x male outlet hose
connection, a 3/4 in. female inlet x male outlet hose connection, and 1/8 in.
female side tapping for gauge. Series IR-56 is low cost and dependable.
Maximum Working Pressure: 150psi (10.3 bar), Adjustable Reduced Pressure
Range: 10 to 60psi (68.9 to 413.7 kPa), Reduced Pressure Setting: 40psi
(275.8 kPa), Delivery up to 250 gph (946 lph).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 123LP
Description: Low Water Pressure Regulator
Size Range: 1/2 in. (15mm)
Series 123LP Low Water Pressure Regulators are used in residential and
point-of-use applications to regulate water pressure in piping systems that
require low pressure regulation. It consists of a bronze body construction
with NPT threaded female inlet and outlet connections, stainless steel seat,
stainless steel integral strainer, reinforced EPDM diaphragm, and EPDM valve
disc. Series 123LP offers high performance, high flow capacity, and is
serviceable in-line. Maximum Working Pressure: 200psi (13.8 bar), Adjustable
Pressure Range: 40 to 50psi (276 to 345 kPa), Reduced Pressure Setting: 25psi
(172.4 kPa).
|
|
|
Series: 215
Description: Precision Low Pressure Regulators
Size Range: 1/8 to 1/2 in. (3 to 15mm)
Series 215 Precision Low Pressure Regulators are used in applications
requiring low-pressure, super-sensitive regulation in systems using water or
No. 2 fuel oil. It consists of a brass body construction with NPT threaded
female inlet and outlet connections, replaceable stainless steel seat, large
diaphragm, and 30 mesh stainless steel strainer. Series 215 provides
exceptional performance and stability, and is suitable for pressure supply to
wall attachment fluidic devices, and for water requirements up to 2.5 gpm
(9.5 lpm). Maximum Working Pressure: 300psi (21 bar).
|
|
|
Series: 263A
Description: Small Pressure Regulators
Size Range: 1/4 to 1/2 in. (8 to 15mm)
Series 263A Small Pressure Regulators are used in small general purpose
applications to regulate pressure in piping systems using water and No. 2
fuel oil. It consists of a brass body construction with NPT threaded female
inlet and outlet connections, 1/4 in. 3-way low-pressure gauge port, aluminum
spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and
tee handle adjustment. Options include Viton trim and slotted adjusting
screw. Strainers are recommended. Series 263A has an oversized orifice and is
ideal for use on beverage dispensing and paint spraying equipment, ice cube
machines, humidifiers, drinking fountains, and other small process
applications. Maximum Working Pressure: 300psi (21 bar).
|
|
|
Series: SS263AP
Description: Stainless Steel Small Pressure Regulators
Size Range: 1/4 to 1/2 in. (8 to 15mm)
Series SS263AP Stainless Steel Small Pressure Regulators are used in small
general purpose applications to regulate pressure in piping systems using
water and No. 2 fuel oil. It consists of NPT threaded female inlet and outlet
connections, 1/4 in. 3-way low-pressure gauge port, aluminum spring cage,
Buna-N stainless steel disc, reinforced Buna-N diaphragm, and tee handle
adjustment. Options include Viton trim and slotted adjusting screw. Strainers
are recommended. Series SS263AP has an oversized orifice and is ideal for use
on beverage dispensing and paint spraying equipment, ice cube machines,
humidifiers, drinking fountains, and other small process applications.
Maximum Working Pressure: 300psi (21 bar).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 560
Description: Mini Water Pressure Regulators
Size Range: 1/8x1/4 in. (3.0x8mm)
Series 560 Mini Water Pressure Regulators are used in industrial process
applications to regulate water pressure in systems requiring a small
economical regulator package. It consists of a brass body construction with
female threaded inlet and outlet connections, 1/8 in. female side tapping
(plugged) for gauge, stainless steel stem and spring, Buna-N seat and
diaphragm, and heavy duty adjusting screw (slotted and knurled). Series 560
has an oversized orifice and is ideal for use in miscellaneous plumbing
applications and OEM equipment such as travel trailers. Maximum Working
Pressure: 300psi (21 bar).
|
|
|
Series: H560
Description: Mini Water Pressure Regulators
Size Range: 3/4x3/4 in. (20x20mm)
Series H560 Mini Water Pressure Regulators are used in OEM applications to
regulate water pressure in grid systems and recreational vehicles. It
consists of a brass body construction with female inlet and male outlet hose
connections, 1/8 in. female side tapping (plugged) for gauge, stainless steel
stem and spring, Buna-N seat and diaphragm, and heavy duty adjusting screw
(slotted and knurled). Series H560 is low cost, dependable, and IAPMO listed.
Maximum Working Pressure: 150psi (10.3 bar), Adjustable Reduced Pressure
Range: 10 to 60psi (68.9 to 413.7 kPa), Standard Pressure Setting: 40psi
(275.8 kPa), Delivery up to 250 gph (946 lph).
|
|
|
Series: 25AUB-Z3
Description: Water Pressure Reducing Valves
Size Range: 1/2 to 2 in. (15 to 50mm)
Series 25AUB-Z3 Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
bronze body construction, union inlet connection, integral stainless steel
strainer and high temperature resistant reinforced diaphragm for hot water.
The Series 25AUB-Z3 is available with a variety of end connections including:
threaded, solder, PEX and CPVC with both union and double union connections.
Series 25AUB-Z3 has an adjustable pressure range and is serviceable in-line.
Maximum Working Pressure: 300psi (21 bar), Adjustable Reduced Pressure Range:
25 to 75psi (172 to 517 kPa), Standard Pressure Setting: 50psi (344kPa).
|
|
|
Series: N35B
Description: Water Pressure Reducing Valves
Size Range: 1/2 to 1 in. (15 to 25mm)
Series N35B Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
bronze body construction, integral stainless steel strainer, replaceable seat
module and thermal expansion bypass. The N35B Series is available in a
variety of end connections, including: threaded, solder, PEX and CPVC with
both union and double union connections. Maximum Working Pressure: 400psi
(27.6 bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa),
Standard Pressure Setting: 50psi (345 kPa).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: N45B-M1
Description: Water Pressure Reducing Valves
Size Range: 1/2 to 1 in. (15 to 25mm)
Series N45B-M1 Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
bronze body construction, stainless steel integral strainer, thermoplastic
seat and cage, thermal expansion bypass, and sealed spring cage for
waterworks pit installations. The N45B-M1 Series is available in a variety of
end connections including: threaded, solder, PEX and CPVC with both union and
double union connections. Maximum Working Pressure: 400psi (27.6 bar),
Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard
Pressure Setting: 50psi (345 kPa).
|
|
|
Series: N45B
Description: Water Pressure Reducing Valves
Size Range: 1 1/4 to 2 in. (32 to 50mm)
Series N45B Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
bronze body construction, integral stainless steel strainer and thermal
expansion bypass. Available with either double union threaded or solder end
connections. Maximum Working Pressure: 300psi (21 bar), Adjustable Reduced
Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure Setting:
50psi (345 kPa).
|
|
|
Series: N45B-EZ-M1
Description: Water Pressure Reducing Valves
Size Range: 1/2 to 1 in. (15 to 25mm)
Series N45B-EZ-M1 Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
bronze body construction, integral stainless steel strainer, thermoplastic
cage and seat, thermal expansion bypass, factory calibrated outlet pressure
adjustment and easily adjustable pressure setting. The N45B-EZ-M1 Series is
available in a variety of end connections including: threaded, solder with
both union and double union connections. Maximum Working Pressure: 400psi
(27.6 bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard
Pressure Setting: 50psi (345 kPa).
|
|
|
Series: N45B-EZ
Description: Water Pressure Reducing Valves
Size Range: 1 1/4 to 2 in. (32 to 50mm)
Series N45B-EZ Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and reduction of water consumption. It consists of
a bronze body construction, integral stainless steel strainer, thermoplastic
cage and seat, thermal expansion bypass, factory calibrated outlet pressure
adjustment and easily adjustable pressure setting. The N45B-EZ Series is
available with either double union threaded or solder end connections. Maximum
Working Pressure: 300psi (21 bar), Adjustable Reduced Pressure Range: 25 to
75psi (172 to 517 kPa), Standard Pressure Setting: 50psi (345 kPa).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: N55B-M1
Description: Water Pressure Reducing Valves
Size Range: 1/2 to 1 in. (15 to 25mm)
Series N55B-M1 Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
bronze body construction integral stainless steel strainer, thermoplastic
seat, bronze sealed spring cage for waterworks pit installations and thermal
expansion bypass. The N55B-M1 is available with either threaded, solder, PEX
or CPVC end connections. Maximum Working Pressure: 400psi (27.6 bar),
Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard
Pressure Setting: 50psi (345 kPa).
|
|
|
Series: N55B
Description: Water Pressure Reducing Valves
Size Range: 1 1/4 to 2 in. (32 to 50mm)
Series N55B Water Pressure Reducing Valves are used in commercial and
residential applications to reduce incoming water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
bronze body construction integral stainless steel strainer, thermoplastic
seat, bronze sealed spring cage for waterworks pit installations and thermal
expansion bypass. The N55B is available with either double union threaded or
solder end connections. Maximum Working Pressure: 300psi (21 bar), Adjustable
Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure
Setting: 50psi (345 kPa).
|
|
|
Series: N250
Description: Water Pressure Reducing Valves
Size Range: 1/2, 3/4 in. (15, 20mm)
Series N250 Water Pressure Reducing Valves are used in residential
applications to reduce incoming domestic water pressure for protection of
plumbing system components and to reduce water consumption. It consists of a
unitized iron body construction with NPT threaded female inlet and outlet
connections and integral strainer. Maximum Working Pressure: 250psi (17.2
bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa), Standard
Pressure Setting: 50psi (345 kPa).
|
|
|
Series: U5-Z3
Description: High Performance Water Pressure Reducing Valves
Size Range: 1/2 to 2 in. (15 to 50mm)
Series U5-Z3 High Performance Water Pressure Reducing Valves are used in
commercial, industrial, and residential applications to reduce incoming water
pressure for protection of plumbing system components and to reduce water
consumption. It consists of a bronze body construction, integral stainless
steel strainer replaceable seat module and optional thermal expansion bypass.
Available with threaded or solder end connections. Maximum Working Pressure:
300psi (21 bar), Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa),
Standard Pressure Setting: 50psi (345 kPa).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 223, 223S
Description: High Capacity Water Pressure Reducing Valves
Size Range: 1/2 to 2 1/2 in. (15 to 64mm)
Series 223, 223S High Capacity Water Pressure Reducing Valves are used in
commercial, industrial, and institutional applications to reduce incoming
water pressure for protection of plumbing system components and to reduce
water consumption. It consists of a bronze body construction (2 1/2 in. is
iron), enlarged diaphragm, spring cage and seat orifice for super capacity,
sealed spring cage for waterworks pit installations and an optional thermal
expansion bypass. Available with NPT threaded female inlet and NPT female
threaded outlet with (223-S) or without (223) strainer. Maximum Working
Pressure: 300psi (21 bar), Adjustable Reduced Pressure Range: 25 to 75psi
(172 to 517 kPa), Standard Pressure Setting: 50psi (345 kPa).
|
|
|
Series: N223B, N223BS
Description: High Capacity Water Pressure Reducing Valves
Size Range: 2 1/2 to 3 in. (64 to 80mm)
Series N223B, N223BS High Capacity Water Pressure Reducing Valves are used in
commercial, industrial, and institutional applications to reduce incoming
water pressure for protection of plumbing system components and to reduce
water consumption. It consists of a triple-coated corrosion preventative
bronze body construction, an enlarged diaphragm, spring cage and seat orifice
for super capacity performance, sealed spring cage for waterworks pit
installations and thermal expansion bypass. Available with NPT threaded
female inlet x NPT threaded female outlet with (N223BS) or without (N223B)
strainer. Maximum Working Pressure: 300psi (21 bar), Adjustable Reduced
Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure Setting:
50psi (345 kPa).
|
|
|
Series: N223F
Description: Flanged, High Capacity, Water Pressure Reducing Valves
Size Range: 3 in. (80mm)
Series N223F Flanged, High Capacity, Water Pressure Reducing Valves are used
in commercial and industrial applications to reduce incoming water pressure
for protection of plumbing system components and to reduce water consumption.
It consists of a triple-coated corrosion preventative iron body construction
enlarged diaphragm, spring cage and seat orifice for super capacity
performance and a thermal expansion bypass check. Available with flanged end
connections. Maximum Working Pressure: 175psi (12.06 bar), Adjustable Reduced
Pressure Range: 25 to 75psi (172 to 517 kPa), Standard Pressure Setting:
50psi (345 kPa).
|
|
|
Series: 127W
Description: High Capacity Water Pressure Reducing Valves
Size Range: 3 in. (80mm)
Series 127W High Capacity Water Pressure Reducing Valves are used in
commercial and industrial applications to reduce incoming water pressure for
protection of plumbing system components and to reduce water consumption. It
consists of a bronze body construction with NPT threaded inlet and outlet
connections, replaceable stainless steel seat and high temperature resisting
interchangeable diaphragm chamber. Maximum Working Pressure: 175psi (12.06
bar), Adjustable Reduced Pressure Range: 25 to 100psi (1.7 to 7 bar).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: F127W
Description: Flanged High Capacity Water Pressure Reducing Valves
Size Range: 3, 4 in. (80, 100mm)
Series F127W Flanged High Capacity Water Pressure Reducing Valves are used in
commercial and industrial applications to reduce incoming water pressure for
protection of plumbing system components and to reduce water consumption. It
consists of a triple-coated corrosion preventative iron body construction
with flanged inlet and flanged outlet connections, replaceable disc,
interchangeable diaphragm chamber, replaceable stainless steel seat and
stainless steel stem. Size 4 in. is tapped for a bypass line and an auxiliary
regulator. Maximum Working Pressure: 175psi (12.06 bar), Adjustable Reduced
Pressure Range: 25 to 100psi (1.7 to 7.0 bar).
|
|
|
Series: 2300
Description: Direct Operated Water Pressure Reducing Valves
Size Range: 3 to 6 in. (80 to 152mm)
Series 2300 Direct Operated Water Pressure Reducing Valves are used in
commercial and industrial applications to regulate the flow of water to
dead-end services where the flow is intermittent and changes rapidly, such as
to flushometers, snap cocks, and for locations where city water pressure
needs to be reduced to supply plumbing fixtures. It consists of an iron body
construction with bronze trim, Hycar composition disc, piston, Hycar
diaphragm, tempered steel spring, and a single seat. Series 2300 is
self-contained, self-aligning, and in-line serviceable with all internal
parts accessible. The pressure-balanced design eliminates water hammer,
pressure fluctuations, and pressure creep. It is ideal for use in industrial
plants for washrooms and processing operations, apartment buildings, hotels,
office buildings, hospitals, municipal and plant water mains. Maximum
Pressure: 200psi (14 bar), Reduced Pressure Range: 30 to 80psi (207 to 552
kPa).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
