|
Series: APU
Description: SpringFit Access Panels
Size Range: 9x9 in. or 15x15 in. (229x229mm or 381x381mm)
Series APU SpringFit Access Panels are used in residential and commercial
applications to conceal plumbing, wires, cables and spa pumps. It consists of
a wall-mountable panel that can be painted or wallpapered. It is available in
two sizes (9x9 in. and 15x15 in.) to fit any size shape hole from 5"x
6" to 15" x 15". No exact measurements of hole required to
install.
|
|
|
Series: WAS
Description: Anti-Sweat Valves for Water Closets
Size Range: 1/2 in. (15mm)
Series WAS Anti-Sweat Valves for Water Closets are used in residential
applications for mixing hot water with cold supply water to avoid
condensation build-up on the outside of the water closet, and to temper the
water inside the toilet tank. It consists of a brass body construction with
compression end or IPS connections.
|
|
|
Series: BIC-1000
Description: Backflow Irrigation Control Station
Series BIC-1000 Backflow Irrigation Control Station combines the Master
Valve, Regulator Valve and Backflow Assembly in one easily located component.
All station components are above ground level on a stainless steel station.
The BIC-1000 station has a preload pilot, high-pressure lockout switch and a
modular design for easy component replacement. Designed for irrigation
applications.
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: PVS-1000
Description: Pre-Engineered Valve Stations
Size Range: Various custom configurations
Series PVS-1000 Pre-Engineered Valve Stations are used in commercial and
industrial applications to provide uninterrupted flow, maximum flow
performance, a reduction in number of components, extension of station life,
ease of maintenance, and quality and craftsmanship in custom water flow
control systems. They consists of any combination of integral backflow
prevention devices, meters, pressure regulators, automatic control valves,
strainers, headers, shutoff valves, and instrumentation as needed to suit
specific applications. The components are assembled from proven, reliable
Watts components to meet exacting project application requirements. Series
PVS-1000 are factory pre-assembled, tested, and optionally certified by
independent agencies to ensure flow performance for critical building
demands. It is ideal for use in hospitals, restaurants, schools, industrial
facilities, multi-family dwellings, and other similar buildings.
|
|
|
Series: SC
Description: Sill Cock Faucets
Size Range: 1/2, 3/4 in. (15, 20mm)
Series SC Sill Cock Faucets are used in residential applications to permit
the attachment of portable hoses to hose thread faucets. It is a hose-bibb
type faucet that consists of an iron body construction with tee-handle or
handwheel. Series SC is ideal for inside and outside installations requiring
non-continuous pressure such as general outside gardening and lawn uses.
Specific models available with various types of connections and handles
(threaded or solder with hose connections). Maximum Working Pressure:125psi
(8.6 bar) CWP.
|
|
|
Series: SC8
Description: Sill Cock Faucets with Separate Vacuum Breaker
Size Range: 1/2, 3/4 in. (15, 20mm)
Series SC8 Sill Cock Faucets with Separate Vacuum Breaker are used in
residential applications to permit the attachment of portable hoses to hose
thread faucets. It is a hose-bibb type faucet that consists of an iron body
construction with tee-handle or handwheel. Series SC is ideal for inside and
outside installations requiring non-continuous pressure such as general
outside gardening and lawn uses. With the vacuum breaker installed, the hose
bibb is tamper proof and provides protection against backsiphonage. Specific
models available with various types of connections and handles (threaded or
solder with hose connections). Maximum Working Pressure:125psi (8.6 bar) CWP.
|
|
|
Series: MHB-RC
Description: Hose Bibb Vacuum Breaker
Size Range: 1/2 in. NPT x 3/4 in. Garden Hose
Series MHB-RC Hose Bibb Vacuum Breakers feature an integral vacuum breaker
for backflow protection of potable water supply, rough chrome plated brass
body, removable polycarbonate handle that converts to loose key design with
lock shield and stainless steel cap screw. Maximum Working Pressure:150psi
(10.3 bar) WOG.
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: SS
Description: Stop Valves
Size Range: 1/2, 3/4 in. (15, 20mm)
Series SS Stop Valves are used in residential applications for shutoff
service only. It consists of a brass body construction with solder
connections and a handwheel for shutoff. Maximum Working Pressure:150psi
(10.3 bar) WOG.
|
|
|
Series: SSC
Description: Stop Valves with Compression Ends
Size Range: 1/2, 3/4 in. (15, 20mm)
Series SSC Stop Valves with Compression Ends are used in residential
applications for shutoff service only. It consists of a brass body
construction with compression end connections and a handwheel for shutoff.
Maximum Working Pressure:150psi (10.3 bar) WOG.
|
|
|
Series: ST,
ST-C
Description: Stop Valves
Size Range: 1/2, 3/4 in. (15, 20mm)
Series ST, ST-C Stop Valves are used in residential applications for shutoff
service only. It consists of a brass body construction with NPT female
threaded connections, and a handwheel (Model ST) or cross style handle (Model
ST-C) for shutoff. Maximum Working Pressure:150psi (10.3 bar) WOG.
|
|
|
Series: SWC,
SWT, SWS
Description: Stop and Waste Valves
Size Range: 3/8 to 3/4 in. (10 to 19mm)
Series SWC, SWT, SWS Stop and Waste Valves are used in residential
applications as stop and waste shutoffs. It consists of a brass body
construction with a handwheel for shutoff. Series SWC, SWT, SWS comes with a
drain cock to allow draining or venting of downstream line when valve is in
the off position. Model SWC is available in 1/2, 3/4 in. (15, 20mm) with
compression end connections. Model SWT is available in 1/2, 3/4 in. (15,
20mm) with NPT female threaded connections. Model SWS is available in 3/8, 1/2,
3/4 in. (10, 15, 20mm) with solder end connections. Maximum Working
Pressure:150psi (10.3 bar) WOG.
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: TR
Description: Transition Risers
Size Range: 4 to 10 in. (100 to 250mm)
Series TR Transition Risers are used to connect the main fire supply to the
building overhead fire system. The fitting passes under the foundation
without joints and extends up through the floor. Provided with installation
tabs, the unit has a CIPS (Cast Iron Pipe Size) coupler for easy connection
to the underground supply (AWWA C900 PVC) and (Ductile Iron Pipe) an industry
standard grooved-end connection (AWWA C606) on the building side for easy
connection to the overhead fire sprinkler system.
|
|
|
Series: A200
Description: Flow-Through Trap Primers
Size Range: 1/2 in. (15mm)
Series A200 Flow-Through Trap Primers are used in commercial and residential
applications to assure delivery of water to floor drain traps to prevent the
evaporation of the water seal that protects a building or room from sewer gas
fumes. It consists of a bronze body construction with a Celcon seat and disc.
Available in threaded (Model A200) or union solder (Model A200S) connections.
Minimum Supply Pressure: must exceed 25psi (172kPa), Maximum Supply Pressure:
125psi (8.6 bar).
|
|
|
Series: FH
Description: Frost-Proof Automatic Draining Wall Hydrants
Size Range: 1/2x1/2, 3/4x1/2 in. (15x15, 20x15mm)
Series FH Frost-Proof Automatic Draining Wall Hydrants are used in commercial
and residential applications to provide freeze protection for the external
water supply. It consists of a brass body construction with nickel-plated
finish, and a steel handwheel. Series FH has a positive seat water shutoff
and an automatic self-draining feature. Available with 1/2 in. copper or 1/2
in. male IPS inlet (Model FH-1-M1), or 3/4 in. male IPS or 1/2 in. female IPS
inlet (Model FH-2-M1).
|
|
|
Series: FHB
Description: Frost-Proof Automatic Draining Wall Hydrants with Backflow
Preventer
Size Range: 1/2x1/2, 3/4x1/2, 3/4x3/4 in. (15x15, 20x15, 20x20mm)
Series FHB Frost-Proof Automatic Draining Wall Hydrants with Backflow
Preventer are used in commercial and residential applications to provide
freeze protection and backflow protection of the external water supply. It
consists of a brass body construction with nickel-plated finish and 3/4 in.
hose outlet, replaceable bibb washer (without removing sill cock from water
line), vacuum breaker, backflow preventer, and a steel handwheel. Series FHB
has a positive seat water shutoff and an automatic self-draining feature.
Available with 1/2 in. copper or 1/2 in. male IPS inlet (Model FHB-1), 1/2
in. PEX inlet (FHB-1-PEX), 3/4 in. male IPS or 1/2 in. female IPS inlet
(Model FHB-2), or 3/4 in. copper inlet or 3/4 in. male IPS (Model FHB-2 3/4).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: HY42
Description: Non-Freeze Wall Hydrants with Backflow Preventer
Size Range: 3/4 or 1 in. (15 or 25mm)
Series HY42 Non-Freeze Wall Hydrants with Backflow Preventer are used in
commercial and industrial applications to provide freeze protection and
backsiphonage protection of the external water supply. It is designed to
blend with modern architecture. It consists of a brass body construction with
chrome-plated brass finish and 3/4 in. hose thread nozzle, 3/4 in. female or
1 in. male IPS threaded inlet connection, replaceable EPDM seat, one-piece
valve plunger to control both flow and automatic drain functions, and loose
tamper-resistant tee key. Model HY42B comes with a mounting box. Series HY42
provides vacuum-breaker and backflow preventer protection and is ideal in
restaurants, schools, office buildings, churches, apartments, motels, stores,
shopping centers and industrial building installations.
|
|
|
Series: TWS
Description: Through the Wall Water Supply Shutoffs
Size Range: 3/4 or 1 in. (15 or 25mm)
Series TWS Through the Wall Water Supply Shutoffs are used to provide outside
access to a building water supply for start-up, winterizing and servicing of
irrigation sprinkler systems. They feature a durable bronze body & shaft,
one piece valve plunger, tamper resistant key operated hydrant, manual drain
port, exterior chrome finish and union connection for ease of installation of
a backflow preventer. Maximum Working Pressure: 175psi (12.06 bar).
|
|
|
Series: 2-M2
Description: Duo-Cloz Manual Washing Machine Shutoff Valves
Size Range: 1/2 in. (15mm)
Series 2-M2 Duo-Cloz Manual Washing Machine Shutoff Valves are used in
washing machine applications to manually control water flow and pressure from
the hot and cold water supply piping to the flexible hoses feeding a washing
machine. It prevents the washing machine hoses from bursting preventing water
damage in the home. It consists of a brass (Models 2-M2 and 2T-M2) or satin
chrome (Models 2-M2-SC and 2T-M2-SC) body construction, and a single DuoCloz
lever to control shutoff of both hot and cold water supplies. Models 2-M2 and
2-M2-SC have 1/2 in. solder or 1/2 in. compression connections. Models 2T-M2
and 2T-M2-SC have 1/2 in. NPT male threaded or 1/2 in. solder connections.
Series 2-M2 has a throttling feature that minimizes the shock effect of
quick-closing washing machine solenoid valves. Maximum Pressure: 150psi (10.3
bar).
|
|
|
Series: A2C-M1
Description: IntelliFlow Automatic Washing Machine Water Shutoff Valves
with Leak Sensor
Size Range: 1/2 in. (15mm)
Series A2C-M1 IntelliFlow Automatic Washing Machine Water Shutoff Valves with
Leak Sensor are used in residential applications to protect against
catastrophic water damage from a burst inlet hose connected to a washing
machine in use or unattended. The Series A2C-M1 IntelliFlow senses when the
washing machine is on or off, and then opens or closes the hot and cold inlet
valves as needed to allow or prevent water from flowing to the washer. If the
Series A2C-M1 detects a leak, current flow to both the hot and cold water
valves are immediately interrupted and closed. It consists of an electrical
three-prong outlet to receive a washing machine power cable, leak sensor, a
power cord, and a replaceable internal strainer screen. Maximum Pressure:
150psi (10 bar).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: A2-IntelliTimer
Description: For Use with A2C-M1 IntelliFlow on 220VAC Powered Washing
Machines
Series A2-IntelliTimer is used in conjunction with the Watts IntelliFlow
Automatic Washing Machine Shutoff Valve. It is a remote timer which allows
the IntelliFlow to be used in applications where the washing machine or a
combination washer/dryer is 220 VAC powered. (The IntelliFlow is not
compatible with 220 VAC powered appliances). The timer initiates a two-hour
cycle when the button is depressed.
|
|
|
Series: DWB
Description: DuoClozure Wall Boxes with Series 2-M2 Washing Machine
Shutoff Valve
Size Range: 1/2 in. (15mm)
Series DWB Duo-Clozure Wall Boxes with Series 2-M2 Washing Machine Shutoff Valve
are used in washing machine applications to manually control water flow and
pressure from the hot and cold water supply piping to the flexible hoses
feeding a washing machine. It comes with a decorative white faceplate that
can be painted or papered to match wall decor. It prevents the washing
machine hoses from bursting thereby preventing water damage to the home. It
consists of a Model 2-M2 valve with 1/2 in. solder connections, adjustable
stud mounting brackets, a single Duo-Cloz lever to control shutoff of both
hot and cold water supplies, and water pressure test plugs. Maximum Pressure:
150psi (10.3 bar).
|
|
|
Series: WAMV
Description: Brass Angle Meter Valves
Size Range: 3/4x3/4, 3/4x1 in. (20x20mm, 20x35mm)
Series WAMV Brass Angle Meter Valves are used in light commercial and
residential applications for incoming water supply service. It consists of a
brass body construction with 3/4 in. flare x 3/4 in. female IPS connections,
or 3/4 in. flare x 1 in. female IPS connections. Maximum Pressure: 125psi (9
bar).
|
|
|
Series: WAMV-W
Description: Brass Angle Meter Valves
Size Range: 3/4x3/4, 3/4x1 in. (20x20mm, 20x35mm)
Series WAMV-W Brass Angle Meter Valves are used in light commercial and
residential applications for incoming water supply service. It consists of a
brass body construction with 3/4 in. flare x 3/4 in. female IPS connections,
or 3/4 in. flare x 1 in. female IPS connections, and comes standard with
waste feature. Maximum Pressure: 125psi (9 bar).
|
|
|
Call 877-690-4996 For Pricing and Availability
|
|
Series: 05
Description: Mini Water Hammer Arrestors
Size Range: 3/8 to 3/4 in. (10 to 20mm)
Series 05 Mini Water Hammer Arrestors are used in light commercial and
residential applications to control water pressure shock and prevent water
hammer conditions. Series 05 is factory air charged and is not rechargeable.
It can be installed in new or existing plumbing systems in concealed
locations with a standard pipe tee in any angle. Series 05 is ideal for
dishwashers, clothes washers, and quick-closing faucets. Available in various
models: Model 05 with NPT connections, Model 05H with hose connections, Model
05S with solder connections, or Model 05C with compression connections.
Maximum Working Pressure: 150psi (10.3 bar).
|
|
|
Series: 15
Description: Water Hammer Arrestors
Size Range: 1/2 to 2 in. (15 to 50mm)
Series 15 Water Hammer Arrestors are used in commercial and industrial
applications to control water pressure shock and prevent water hammer
conditions. It consists of a copper body, EPDM seals and O-rings, brass
piston and cap, and NPT threaded brass hex adapter. Optional 15AK adapters
available. Series 15 is factory air charged and is not rechargeable. It can
be installed in new or existing plumbing systems in concealed locations with
a standard pipe tee in any angle. Series 15 is ideal for commercial dishwashers,
clothes washers, and quick-closing faucets. ASSE and ANSI approved, PDI
certified, and IAMPO listed. Maximum Working Pressure: 150psi (10.3 bar).
|
|
|
Series: 150A
Description: Water Hammer Arrestors
Size Range: 1/2 to 3/4 in. (15 to 20mm)
Series 150A Water Hammer Arrestors are used in residential applications to
control water pressure shock and prevent water hammer conditions. It consists
of a pre-charged air chamber that is rechargeable, an air-tight sealing cap,
standard tire valve connection for easy charging, stainless steel top,
sealed-in diaphragm, lower stainless steel chamber, and brass hex adapter for
easy installation. It can be installed in new or existing plumbing systems in
any angle. Series 150A is ideal for dishwashers, clothes washers, and
quick-closing faucets. Model 150A-HA water hammer arrestor with 3/4 in. hose
thread for washing machines and Model 150-HA is just 3/4 in. fitting. Maximum
Working Pressure: 150psi (10.3 bar), Maximum Shock Pressure: 200psi (13.8
bar), Maximum Velocity: 10 F.P.S.
|
|
|
Call 877-690-4996 For Pricing and Availability
|
