HOME

â 2001

HOME

SteamShop a div. of
J.W. Allen & Associates, Inc.
2403 Market Street
Jacksonville, Fl 32206

 

Saves You Money

Call Us
877-690-4996

In Line Check Valves
Apollo / Conbraco

 Fax Us
904-353-5608

 

Description: Ball-Cone Check Valves
Sizes: 1/4" to 3" (Stainless Steel up to 2 inches)
Ends: FNPT x FNPT

Bronze or Stainless Steel

PRECAUTIONARY NOTE
Not recommended for use with reciprocating pumps and similar applications which may induce repetitious vibrations. Low flow rates, which do not fully open the valve, may result in undesirable noise and premature valve failure, upstream flow disturbances, which create turbulence, may also result in rapid wear. Therefore, it is recommended that a minimum of 10 diameters of straight pipe be provided between the check valve and any upstream flow disturbances such as pumps, control valves, elbows, etc.

Overview

Patented design (US Pat. No. 4,172,465) with reinforced ball-cone check and stainless steel springs, these valves offer exceptional resistance to chemicals and corrosion. No radial alignment is needed.

Features

 

 

 

 

 

1/2" psi opening pressure

Bronze sizes from 1/4" to 3". Stainless steel sizes 1/4" to 2"

Tight shut-off with liquid media

Straight-through design minimizes flow changes

125 psig steam rating